New Roof Construction & Roof Installation in NYC
Building from the ground up, adding a rear extension or topping off a renovation? Your roof protects everything below it. Avenue Roofing NYC’s new roof construction crews design, install, and flash complete roofing systems for NYC homes and buildings, built right from the first board.
- New Builds & Additions
- Code-Compliant Installs
- Licensed & Insured
- Who We Are
A New Roofing Company With Two Decades Behind It
Looking for a new roofing company you can trust on a live job site? Our crews bring 20+ years of new roof construction experience across NYC, from fresh construction in Brooklyn and rear additions in Queens to gut-renovated townhouses across Manhattan.
We work from your architect’s drawings, coordinate with your general contractor and match each detail to the plans. Every seam, drain and flashing joint is installed with care, because fixing a mistake later costs far more than doing it right now.
New Roof Installation Services for Homes and Buildings
From single extensions to full building envelopes, we handle every part of putting a new roof on a New York structure.
New Construction Roofing
For ground-up builds, we install the full roof assembly over new framing or concrete, timed to your build schedule and inspections.
Additions and Extensions
Rear extensions, dormers and enlargements get roofs that tie cleanly into the existing building, with flashing that keeps joints dry.
Gut-Renovation Roof Systems
During major renovations, we replace the whole system with new insulation, membrane or shingles, built as one complete assembly.
Decking, Insulation and Underlayment
A strong roof starts below the surface. We install sheathing, tapered insulation and underlayment that meet current energy code.
Roof Drains, Scuppers and Edges
New roofs need a clear way out for water. We set drains, scuppers, gravel stops and drip edges exactly where the plans call for them.
Skylights, Hatches and Penetrations
We frame and flash skylights, roof hatches, vents and mechanical curbs during installation, so every opening is sealed from day one.
From Blueprint to Watertight: How We Install
A build-friendly process that keeps your project on track.
Review the Plans
We study drawings and specs, then flag any detail that could cause leaks later.
Permits and Materials
We confirm required approvals and order the specified roofing system.
Build the Roof Layers
Decking, insulation, underlayment and roofing go on in the correct order.
Flash and Inspect
We seal every edge and opening, then inspect the roof before handover.
Picking the Right Roofing System for a New Build
The best new roof matches the building’s shape, use and budget. A flat-topped Brooklyn infill needs a very different system than a pitched-roof home on Staten Island. We help you, your architect and your builder weigh lifespan, energy performance, upkeep and cost, then install the system that makes the most sense.
Flat Roof Systems
Pitched Roof Systems
Green and Concrete Roofs
Energy-Smart Roofs
Roof Installation in Brooklyn & Across New York
New construction is booming in every borough, and each site comes with its own access, zoning and neighbor concerns. Whether you’re building on a narrow Brooklyn lot or a wide Staten Island parcel, we bring the right crew and equipment.
- Testimonials
Builders and Owners on Working With Us
- Why Choose Us
Why Builders Choose Our New Roof Contractors
On a construction site, the roofer can either keep the job moving or hold everyone up. We show up when scheduled, follow the drawings, and communicate with your GC and architect directly. Details are installed to spec, inspections are passed and the building is dried in on time, so the trades after us can start work.
- Installs that follow drawings and specs
- Direct coordination with GCs and architects
- Code-compliant insulation and roofing assemblies
- Licensed and insured for NYC construction work
- Manufacturer-approved installation methods
- Clean, organized work areas on busy sites
Planning a new build or addition? Call (646) 498-9539 to talk through your roof plans and get a free estimate.
(646) 498-9539
- FAQs
New Roof Construction FAQs
How long does a new roof installation take?
It depends on roof size, system and site access. A small extension may take a day or two, while a full building takes longer. We give you a timeline upfront.
What is the best roofing material for NYC weather?
No single roofing material fits NYC. Flat roofs use TPO, EPDM, or modified bitumen; pitched roofs use shingles, metal, or slate. These endure freeze-thaw cycles, summer heat, heavy rain, and nor’easters. Lifespans: TPO/EPDM ~20–30 yrs, mod-bit ~15–20 yrs, shingles ~25–30 yrs, slate 75+ yrs.
What affects new roof installation pricing?
NYC new roof installations are primarily driven by roof size, material choice (such as EPDM, TPO, or slate), and architectural complexity. Additional cost drivers include high local labor rates, structural crane or scaffolding access, and strict city building permits.
Can you work from my architect's plans?
Yes. We review the drawings and specs, ask questions early and install to the approved details, coordinating with your design team as needed.
Do you work with general contractors?
Yes. As a new roof company used to busy job sites, we often work as the roofing trade on GC-led projects, matching your schedule and paperwork. Replacing an existing roof instead? See our roof replacement service.
Give Your New Build the Roof It Deserves
- Free Estimate · Plan-Based Pricing
A new building is only as strong as the roof protecting it. Send Avenue Roofing NYC your plans or book a site visit today. We’ll review the details, recommend the right system and give you a clear written price, so your roof goes on right, on time and on budget. Upload your roof plans for a plan-based quote.
- Licensed & Insured in New York
- 20+ Years of Installations
- 4.5★ from 150+ Google Reviews
- Warranty-Backed Installs